Lcd Monitor - Panasonic HXDC2 Owner's Manual

≥ The battery is not charged. Remove the battery from the unit, and try
charging again.
≥ Check that the terminals of the unit or battery are not dirty or covered
with a foreign object, and connect the battery correctly once again. If a
foreign object or dirt is present, turn off the unit before removing.
≥ The battery or environment is at an extremely high or low temperature.
Wait until the temperature has returned to an appropriate level and try
charging again. If you are still unable to charge, there may be a fault in
the unit, battery or AC adaptor.
Off:
≥ Charging has finished.
≥ If the status indicator stays off despite the charging being unfinished,
there may be a fault in the unit, battery or AC adaptor. Refer to page
158 for details on the battery.
About the SD card
When disposing of or giving away the SD card, note that:
≥ Formatting and deletion of this unit or computer only changes the file
management information and does not completely delete the data in
the SD card.
≥ It is recommended that the SD card is
physically destroyed or the SD card is
physically formatted using this unit when
disposing of or giving away the SD card.
To perform a physical format, connect the
unit to the AC adaptor, insert the SD card,
select [FORMAT] # [DELETE DATA]
from the option menu 2 and follow the on-screen instructions.
≥ The customer is responsible for the management of the data in the SD
card.

LCD monitor

≥ When the LCD monitor gets dirty, wipe it with a soft cloth, such as
eyeglass cleaner.
≥ In a place with drastic temperature changes, condensation may form
on the LCD monitor. Wipe it with a soft cloth, such as eyeglass cleaner.
160
VQT4D14
Delete all data on the card?