Turning The Unit On/Off; About Standby Mode - Panasonic HXDC2 Owner's Manual

Preparation

Turning the unit on/off

Open the LCD monitor and press the power button to
turn on the unit.
The LCD monitor turns on.

About standby mode

When the LCD monitor is closed while the unit is on, the unit enters
standby mode which consumes very little power.
In standby mode, opening the LCD monitor turns on the unit, making the
unit ready for recording immediately. Use standby mode when you stop
using the unit but intend to use it again after a short time.
∫ Standby mode
≥ The unit does not go into standby mode when you close the LCD
monitor during motion picture recording or audio recording.
To turn off the unit
Hold down the power button until the
LCD monitor goes off.
≥ Pressing the power button for a short
time sends the unit into sleep mode.
(l 28)
∫ To turn on the unit
27
VQT4D14