Table of Contents
Advertisement
2
Wipe off the water, place the camera on a dry cloth and leave it to dry
for a while in a well-ventilated shaded spot.
3
Check that there is no water on
the camera, and open the
battery cover and terminal
cover.
h Moisture may easily
accumulate in the grooves
inside the covers, so take care
that no water gets inside.
4
Wipe off any water or sand
inside the battery cover and
terminal cover with the
supplied brush or a soft dry cloth.
i After the camera has been used underwater or soaked in fresh water,
moisture may collect in the grooves around the card/battery compartment
and connection terminals. In addition, water droplets may adhere to the
card or battery if the battery cover is opened without sufficiently drying the
camera. Be sure to wipe off the water with a soft dry cloth in such cases.
i Do not open or close the battery cover or terminal cover with water
droplets still on the camera. The water droplets may seep into the camera,
causing condensation and malfunction.
<Wiping moisture from the camera>
i If there is moisture inside the battery cover, wipe every crevice completely
clear of moisture.
*This moisture is not due to exposure to water.
Moisture
here
15
VQT3P45
Advertisement
Table of Contents
