Panasonic HVX200A - Camcorder - 1080p Getting Started Manual page 14

MCR (Memory Card Recorder) MODE
Toggle between camera and MCR Mode (VCR mode if shooting tape) using button
•
on back of camera.
Thumbnail Mode:
•
a) Navigate through and play thumbnails using arrow buttons on top of camera.
Up button plays clip, down button returns to menu, left and right arrows
navigate
b) Only clips recorded in current camera format setting will play back. Clips
recorded in another format are numbered in red and will not play.
c) To select a clip navigate to clip and press pause button; clip will have blue
outline. Multiple clips or groups of clips can be selected.
d) To delete a clip (to free up more space on the P2 card), select the clip(s) to be
deleted, then select Menu > operation > delete.
e) Press Menu button to access clip menus:
i) Thumbnail Menu – format and sort thumbnail display; choose to display
only selected clips, clips of the same format, marked clips, sort clips by p2
slot, etc. Change display setup, thumbnail size, etc.
ii) Operation Menu – deletes clips, repairs clips (clips can be damaged if
battery dies during recording, format P2 cards or SD card (THIS WILL
ERASE ALL DATA)
Hit Thumbnail button to turn off thumbnails. This allows you to use LCD display to
•
monitor incoming video if you're using camera as a recorder, and allows you to
access a second MCR menu (by hitting menu in Blue Screen mode) with recording
setup, playback setup, and display setup controls.
To access the camera's PC mode, enter MCR mode and then continue to hold
•
down the mode switch button. PC mode is used for things like outputting directly
from the camera to a computer hard drive. Since you are not allowed to use the
FW port on the camera, you will probably never need to use this camera mode.