Update Procedure - Samsung SC-DC163 User Manual

Update procedure

Update procedure
- Warning –
It is very important
The following events may interrupt the update process and
DAMAGE TO THE UNIT WHILE UPDATING.
Ⅰ. Unplugging the power cord.
Ⅱ. Power Outage.
Ⅲ. Dirt or Scratches on the disc.
Ⅳ. Opening a disc tray during processing
Ⅴ. Changing from "camera mode" to "play mode"
1) Turn on the power switch.
2) Insert the update disc with the software update
3) The message as "Loader Firmware is updating..." will appear on the screen automatically.
Loader Firmware is updating...
If this mark "
4) If this mark "
and turn the power switch off.
5) After connecting power cord or inserting battery, remove the Disc from the unit.
6) Updating is finished.
; please read the notice below before updating your unit.
" appears on the screen, the unit is already updated.
" appears on the screen, remove power cord or battery from the unit
MAY RESULT IN PERMANENT