Download Print this page
Creek Audio OBH 21 Operating Instructions

Creek Audio OBH 21 Operating Instructions

Headphone amplifier
Hide thumbs Also See for OBH 21:

Advertisement

Quick Links

SPECIFICATION
STANDARD
OUTPUT POWER
HEADPHONE IMPEDANCE
THD
SIGNAL TO NOISE RATIO
POWER CONSUMPTION
POWER SUPPLY
DIMENSIONS
WEIGHT
SPECIAL EDITION
OUTPUT POWER
HEADPHONE IMPEDANCE
THD
SIGNAL TO NOISE RATIO
POWER CONSUMPTION
POWER SUPPLY
DIMENSIONS
WEIGHT
WARRANTY
If within two years of the purchase date your OBH product proves to
be defective for any reason other than accident, misuse, neglect,
unauthorised modification or fair wear and tear, Creek Audio Ltd
will, at its discretion, replace the faulty parts without charge for
labour or return carriage within the U.K.This warranty is valid only
within the U.K. and given in addition to statutory rights. Service
enquiries outside the U.K. should be addressed first to the
supplying dealer and or Creek distributor/importer. Warranties
granted in these countries are entirely at the discretion of the
distributor.
Creek Audio Limited
12 Avebury Ct, Mark Road, Hemel Hempstead HP2 7TA England
Telephone: +44 (0) 1442 260146 Fax: +44 (0) 870 622 0846
E-mail: info@creekaudio.com Web: www.creekaudio.com
> 10 mW into 30 to 300 loads
30 to 300
< 0.01% at 1 kHz
> 70 dB
< 4VA
24V DC 150 mA
180 x 100 x 66mm (7.4 x 4 x 2.6 ")
570 gms (20 ozs)
> 10 mW into 30 to 300 loads
30 to 300
< 0.005% at 1 kHz
> 70 dB
< 6VA
24V DC 250 mA
180 x 100 x 66mm (7.4 x 4 x 2.6 ")
570 gms (20 ozs)
Thank you for purchasing the OBH 21/21SE headphone amplifier.
You are now in possession of a state-of-the-art product. The
functions and operation of the OBH 21/21SE are extremely simple.
The following notes are provided to explain all aspects of its design
and use.
The OBH 21 is a miniature audio amplifier, designed specifically to
drive two pairs of low to medium impedance (30
headphones from a line level source. The OBH 21SE is a high end
version using more expensive components. It is more efficient to
have a small amp do this rather than waste the power of a full size
one when only driving headphones.
The OBH 21 and 21SE are compatible with any source at line level.
For example the average output level of a CD player can be
connected directly to the input of the OBH 21/21SE just as it could
also be used in conjunction with a stand-alone pre-amplifier or
integrated amplifier which doesn't have a headphone socket.
Creek OBH 21/21SE
Headphone Amplifier
Operating
Instructions
to 300 )

Advertisement

loading

Summary of Contents for Creek Audio OBH 21

  • Page 1 The OBH 21 is a miniature audio amplifier, designed specifically to unauthorised modification or fair wear and tear, Creek Audio Ltd drive two pairs of low to medium impedance (30...
  • Page 2 INPUT AND OUTPUT CONNECTION INSTALLATION AND OPERATION The OBH 21/21SE is not designed to be connected to the high Connect the Creek Uni power supply adaptor to the mains socket. level speaker output of an integrated or power amplifier. Output Find a suitable place for the OBH 21/21SE and plug the DC power level is controlled by the high quality volume control on the front lead into the rear panel DC jack socket.

This manual is also suitable for:

Obh 21se