Your Digital Receiver; Preparing; Remote Control; Connections - Hitachi HDB72 ARGOS Instruction Manual

YOUR DIGITAL RECEIVER

FRONT PANEL:
ON/OFF
PROG
PROG
DOWN
UP
REAR PANEL:
35021695
ANT. IN TV OUT AUDIO L AUDIO R
SCART (TV) SCART (VCR/AUX)
AERIAL
AERIAL TV
VCR
IN AUDIO OUT
OUT SCART SCART
LEFT/RIGHT

3. PREPARING

3.1. REMOTE CONTROL

First open the battery cover on the underside of the remote control. Put in both batteries 1.5Volt (RO3/AAA)
referring to the imprinted symbols (+/-) in the battery case and put on the battery cover again. While using the
remote control, direct it towards the front side of the receiver. If the remote control does not work or the chosen
function does not work, the batteries are most probably exhausted and they should be replaced as soon as
possible. Please use only the leak proof batteries. It is best to remove the batteries from the remote unit if you will
not be using the remote control unit for long time.

3.2. CONNECTIONS

3.2.1. CONNECTION TO THE TV

Connect your set top box (STB) with the scart lead supplied, from the TV socket on the STB to the scart socket on
your TV. If your TV does not have a scart socket, you will need to purchase a suitable scart adapter lead.
This STB has RGB or CVBS outputs from the scart socket. If your TV has RGB inputs you may select this in the
STB Configuration menu for best results.
6