Detaching Lcd Monitor From Its Stand; Interface For Arm Applications; Connecting The Display To Your Computer - Hitachi CML153XW User Manual

Detaching LCD Monitor from Its Stand

1. Remove the rear panel
2. Unscrew screws of the hinge bracket
3. Remove the stand from LCD monitor

Interface for Arm Applications

Before installing to mounting device, please
refer to Fig.1-2.
The rear of this LCD display has four
integrated 4 mm, 0.7 pitches threaded nuts,
as well as four 5 mm access holes in the
plastic covering as illustrated in Figure 1-3.
These specifications meet the VESA Flat
Panel Monitor Physical
Interface Standard (paragraphs 2.1 and
2.1.3, version 1, dated 13 November 1997).

Connecting the Display to your Computer

1. Power off your computer.
2. Connect one end of the signal cable to
the LCD Monitor's VGA port. (See Fig.
1-4)
3. Connect the other end of the signal
cable to the VGA port on your PC.
4. Make sure both connections are secure.
Attention
This device must be connected to an off-the-shelf video cable in order to
from the monitor. (see Fig. 1-2)
Figure 1-2
Mounting
Figure 1-4
Figure 1-3
21