Connecting The Ac Power; Setting Up The Lcd Monitor; Power Management System - Hitachi CML190SXWB - 19" LCD Monitor User Manual

Connecting the AC Power

1. Connect the power cord to the AC adapter.
(See Fig. 1-5)
2. Connect the AC adapter's DC output
connector to the DC Power Jack of the
monitor.
3. Connect the power cord to an AC power
source.
WARNING
Please install a "Surge Protector" device between the AC Adapter and the electrical wall
outlet for added protection against power surges to prevent the effects of sudden voltage
variations from reaching the LCD Monitor. Sudden power surges may damage your
monitor.
For use only with power supply LINEARITY, LAD6019AB5 or Li-shin, LSE9901B1260.

Setting Up the LCD Monitor

1. Turn on the LCD monitor's hard power
switch, located on the back of the monitor
(See Fig. 1-6)
2. Turn on the LCD Monitor's soft power
switch, located on the bezel of the monitor.

Power Management System

This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management
guidelines. The VESA DPMS provides four power saving modes through detecting a
horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the
power LED indicator color shows.
Figure 1-5
Figure 1-6
15