Table of Contents
Advertisement
n
THE ENCLOSED POWER CORD MUST BE USED !
Failure to do so may cause electric shock hazard or fire hazard.
In USA/Canada, use a UL LISTEDKSA LABELLED or CERTIFIED power cord set
meeting the following specifications :
Rating: min. 125V, 7A , Length: max. 3.0m , Type: SVT or SJT
Plug type: NEMA 5-15P figure, Parallel blade, Grounding type
In Europe, a proper European standard approved power cord is to be used with this
monitor.
For a rated current up to 6 A, a type not lighter than H05W-F 3G 0.75 mm* or
GROUND CONNECTION !
100 - 120 V for USA, Canada, etc.
200 - 240 V for Europe, etc.
(This monitor will automatically adjust to the input voltage 100 - 120 / 200 - 240V.)
This equipment relies on the protective devices in the building installation for short-circuit
and
over-current protection. Refer to the following table for the suitable number and
location of the protective devices which should be provided in the building installation.
INFORMATIVE EXAMPLES OF PROTECTIVE DEVICES IN SINGLE - PHASE
neutral reliably identified, except for
Verify that the protective devices in the building installation meets the conditions in the
table prior to installing the equipment.
EQUIPMENT OR SUB -ASSEMBLIES
Either of the two
Either of the two
ENGLISH - 3
.
Advertisement
Table of Contents
