Table of Contents
Advertisement
THE POWER PLUG from the power point ! Then check that there is no
smoke and no fire, and contact your dealer.
damaged, shocked, insert foreign object, etc.) could cause a fire, electric shock, etc.
DO NOT apply any shock to the monitor.
DO NOT insert any foreign object into the monitor.
DO NOT oil the monitor.
The power point should be close to the monitor and easily accessible.
The monitor contains high voltage components.
inside, if you want.
n
BE CAREFUL IN HANDLING THE LCD (Liquid Crystal Display) !
DO NOT touch the liquid crystal even if the monitor is damaged, to prevent a injury to
health.
When you touched it, wash your hands clean.
the mouth, eyes, etc., consult a doctor.
For dumping, you MUST comply with the rule of the area in which you are dumping it.
DO NOT scratch, press or strike the LCD screen.
DO NOT adhere a drop of water etc. to the LCD screen.
screen, wipe lightly with a soft cloth, at once.
n
INSTALL THE MONITOR IN AN SUITABLE ENVIRONMENT !
to prevent a fire, electrical shock, etc.
DO NOT expose the monitor to rain, moisture, dust, corrosive gases, vibrations, etc.
AVOID placing the monitor in direct sunshine or near a heating appliance.
DO NOT place on an unstable place.
n
KEEP IN A WELL VENTILATED PLACE !
DO NOT cover this monitor or place anything against any sides (not only the top, right
and left side but also the rear and bottom side) of monitor. Ventilation holes are
provided at all sides of cabinet to prevent the temperature from rising.
n
TAKE CARE OF THE AMBIENT ILLUMINATION
Avoid direct rays of the sun or room lighting onto the screen in order to prevent eye
fatigue.
ENGLISH - 2
Ask your dealer to repair or clean
If the liquid crystal adhered to
When a drop is found on the
Advertisement
Table of Contents
