Hitachi CML150XE User Manual page 16

TABLE CONTINUED
Function
BALANCE
LANGUAGE SELECT changes the EasyMenu changes
RECALL
. Proceed to automatic adjustment after more than 20 minutes have passed since the
power is ON.
attached "Utility Disk" is shown.
. To show the adjustment pattern, follow "readmetxt" in the attached "Utility Disk".
If automatic adjustment terminates unsuccessfully, try automatic adjustment again. If
automatic adjustment fails several times in succession, try using manual adjustment.
Refer to page 11 "CONTROL"
. The display may become unclear or distorted while automatic adjustment is in
progress.
. The other functions do not operate while automatic adjustment is in progress.
ENGLISH - 12
R makes the Red weaker.
G makes the Green weaker.
B makes the Blue weaker.
enables (ON) the enhancing disables (OFF) the enhancing
function.
language to the previous language to the next mode.
mode.
1
ITALIAN0 (Italian)
1
ESPANOL (Spanish)
1
DEUTSCH (German)
ENGLISH
adjusts input signal level in addition to phase, clock, H-
position, and V-position automatically .
recalls the factory preset modes.
(Refer to page 9 "STANDARD SETTINGS".)
+
makes the Red stronger.
makes the Green stronger.
makes the Blue stronger.
function.
the
ENGLISH
1
DEUTSCH (German)
ESPANOL (Spanish)
1
ITALIAN0 (Italian)
1
FRANCAIS (French)