Front View; Rear View - Hitachi CM813ET User Manual

L INSTALLATION '
Install the monitor in the following w
—
FRONT VIEW
1.Installation
, taking care to maintain safety.
Rear Cover
/
Signal Input
\
Connector
AC inlet
i
(
-1
\
REAR VIEW
Install the monitor on a horizontal base.
2. Power Cord Connection
@ Make sure of using the power cord meeting the safety standard of the
country in which you are using the monitor.
@ Insert the connector of a power cord to the AC Inlet of the monitor.
@ Insert the plug of the power cord to a receptacle of the correct voltage.
3. Signal Cable Connection
@ Use video signal cable which is included in the carton box.
(Cable model name: HD-0501 FXL)
@ Insert the connector of a signal cable to the Signal Input Connector of the
monitor, with attention to the suitability, and secure the screws on the
connector shell firmly.
@ Connect the other connector end of the signal cable to the host computer.
AC Inlet
n
Signal Input
Connector
\
A receptacle of
the correct voltage
\
Power Cord
i
I
Signal Cable
o g +m \. /
to the host computer
8