Hitachi HDC-561E Instruction Manual page 29

* [ Blank ] Auto
* [ f ] Incand.
* [ h ] Fl1
* [ i ] Fl2
* [ c ] Daylight
* [ d ] Cloudy
ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the
ISO figure is increased), photography will become possible even in dark locations, but
the more pixelated (grainier) the image will appear.
* Auto / 50 / 100 / 200
Metering
This sets the metering method for calculating the exposure.
* [ o ] Average: The entire area of the screen is measured, and the exposure is
calculated.
* [ q ] Spot: A very small portion of the center of the screen is measured, and the
exposure is calculated.
Sharpness
This sets the sharpness of the image that will be captured.
* Hard / Normal / Soft
Saturation
This sets the saturation of the image that will be captured.
* High / Normal / Low
Date Print
The date of recording can be printed directly on the still images. This function must be
activated before the image is captured.
* On / Off
Preview
This sets the preview interval when displaying the captured image on the screen
immediately after the image is captured.
* On / Off
Digital Zoom
This sets whether or not to use digital zoom at the time of photography.
* On / Off
EN-28