Hitachi PW1 37PD5000 User Manual page 54

OPERATING INSTRUCTIONS (continued)
SETUP MENU (continued)
Selected characters
Auto Tuning
Country
Search
Manual Tuning
Position
Search
(C--)
(S--)
(--MHz)
Descrambler
Name
Sound System
Colour System
Skip
NR
Fine Tuning
Sort
(A Line of position List)
Auto Off
[During VIDEO signal input]
1 item is added to the Menu shown in the page
Selected characters
Scart Output
52
(Page1) (Page2)
–
1 2 3 199
• • • • • •
–
–
–
–
Off
( :a letter)
BG I
L'
Auto PAL
NTSC3.58
Off
Off
Decreasing the frequency Increasing the frequency
data for the main tuner data for the main tuner.
–
Off
39
TV Monitor
Select the country name by ▼ ▲ SELECT buttons and press OK
button.
(Page3)
• If some required stations could not be preset in this auto tuning
function, select and preset the required station in the required
position by the manual tuning operation.
–
Press the OK button and it starts the auto tuning.
Set the position number. This also can be set by ▼ ▲ PROGRAM
AV00
UP/DOWN buttons.
At first, select the channel entry method, entering a two digit channel
–
number(CH), entering a two digit S-band number or entering a three
digit frequency(MHz), by pressing the OK button.
Enter two digit number by pressing 0~9 NUMBER buttons. If the
–
number is normal, then it starts the channel search.
Enter two digit number by pressing 0~9 NUMBER buttons. If the
–
number is normal, then it starts the channel search.
Enter three digit number by pressing 0~9 NUMBER buttons. If the
–
number is normal, then it starts the channel search.
Set this to Off normally. If it is set to On, AV4 (Scart) terminal operates
On
as TV signal output, and the screen changes to display AV4 (Scart)
input signal automatically.
This is used to input the name of the TV station within 5 letters. After
fixing the cursor on the first digit, select a letter by ▼ ▲ SELECT
buttons and move to next digit by
button again after finished.
• Selectable letters are " 0" ~`" 9" , " A" ~`" Z" , " +" , " – " , " " (blank),
" ," (comma) and " ." (period) .
DK
Select the sound system through the 5 different settings.
L
SECAM
Select the colour system through the 5 different settings.
NTSC4.43
If this is set to On, that position will be skipped while selecting
On
positions by PROGRAM UP/DOWN buttons.
This is automatically set to On for those non-broadcasting channels.
If this is set to On, it helps to reduce the noise interference visible on
On
the screen, especially in the weaker signal reception areas.
After completing the fine-tuning, press the RETURN button to exit this
mode.
• The variable range is -56 ~ +56.
Press OK button at the a line that is required to change order, then
the characters will change to green. And move it up or down in the
–
list by pressing ▼ ▲ SELECT buttons. And press OK button to
complete it. Press the RETURN button to exit.
If this is set to On, the power will be turned off when there is no
On
transmission signal and no operation for about 10 minutes in the TV
mode.
.
TV:AV4 (Scart) output will be fixed as TV signal output.
Monitor:AV4 (Scart) output can view the image as on the main unit.
But it is possible to monitor only the composite video signal from
AV1, AV2, or AV3 input that is displayed on the screen at the time.
• If Descrambler is set to On, it will be fixed as TV automatically.
Setup hint
ADJUST button. Press the OK
Setup hint