External Connection; Antenna Connection; Stand And Wall-Mounted - Continental Electric CELED48157 Instruction Manual

External Connection

Antenna connection

Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder
cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the
antenna jack. For details Please refer to the following drawing.
Antennas with 300 
Use a 75ohm - 300ohm converter
300ohm coaxial cable

Stand and wall-mounted

How to assemble the stand?
The LED TV is assembled without the stand before leaving the factory, if you need
to assemble the stand, operate as follows:
-Before attaching/detaching the stand, make sure to turn off the TV.
-Before performing work, spread cushioning over the base area to lay the LED TV on.
This will prevent it from being damaged.
Assembling instruction:
1) Fix the stand and the unit together with screws.
flat twins Leads
ANT IN
Antenna feeder
Screws(5-M4X10)
Antennas with 75
75ohm coaxial cable
7
7
 Round Leads
Antenna cable