Channel - Continental Electric CELED48157 Instruction Manual

Menu system instruction

Channel

Before your television can begin memorizing the
available channels, you must specify the type of
signal source that is connected to the TV (i.e. an
antenna or a cable system).
1. Press MENU key to display the main menu on
the screen.
2. Press / key to select "Channel" option.
 
3. Press OK or key to enter "Channel" submenu.

Antenna
1. Press / key to select "Antenna" option.
 
2. Press / key to select "Cable" or "Antenna".
 
Current CH
1. Press / key to select "Current CH" option.
 
2. Press / key to select current channel.
 
Color System
1. Press / key to select "
 
2. Press / key to select the color system
 
(PAL M, PAL N, NTSC).
Auto Search
The TV automatically cycles through all of the available channels and stores them in
memory.
1. Press / key to select "Auto Search" option.
 
2.Press OK or key ,then a notice window will be displayed on the screen.

Select "Start" to start search or "Cancel" to cancel it.
When Searching, press EXIT key to exit tuning at any moment.
Press MENU key to skip DTV tuning when searching DTV, skip ATV tuning when
searching ATV, skip CATV tuning when
searching CATV.
3.After all the available channels are stored,
the searching menu will exit.
DTV Manual Search
Enter digital number and press "OK" to select
DTV Channel.
Color System " option.
23
23
Antenna
Current CH
Color System
Auto Search
DTV Manual Search
Programme Edit
Fine Tune
Signal Information
Select
Color System
Auto Search
DTV Manual Search
Programme Edit
Fine Tune
Please select "Start" button to
Signal Information
begin auto tuning.
Antenna
Current CH
Start
Select
TV
DTV Manual Search
VHF CH
Please select channel
Press Enter to search
No Signal
Quality
Bad Normal
OK Enter Menu
Cable
NTSC
Menu:Return
NTSC
Cable
Cancel
Menu:Return
7
Good
Return