General Description; Overview Of Front And Side Panel - Continental Electric CELED48157 Instruction Manual

General Description

Overview of front and side panel

The buttons on the lower-right panel control your TV's basic features, including the
on-screen menu. To use the more advanced features, you must use the remote control.
TV/AV
Toggles between all the available
input sources.
MENU
Press to see an on-screen menu
of your TV's features.
VOL+/-
Press to increase or decrease the
volume. In the on-screen menu,
use the VOL+/-buttons as left/
right arrow buttons.
CH /
 
Press to change programs.
In the on-screen menu, use the
CH / buttons as up/down
 
arrow buttons.
Standby button
Press button to toggle between
normal and standby mode.
REMOTE CONTROL SENSOR
Aim the remote control towards
this spot on the TV.
LED LOGO Light
Note:
1. The first touch sensor buttons, in addition
to standby button, the other six button light;
continue to operate, the corresponding
indicator flashes.
2. Within 6 seconds without any operation,
indicator turns off.
3. In order to void errors, the TV will go into a
standby mode after touching the standby
button for 2 seconds. In standby mode,
the standby indicator in the respiratory
state (from bright to off and then turn on
of the cycle), the other six lights were off.
4. When the sensor button indicators are off,
touch button is equivalent to the first touch.
5. Please do not touch the buttons in rapid
su cession. c
6. Turn on the TV, in addition to standby
button, the other six indicator will cycle
flash from left to right, suggesting that is
turn on the TV; TV is turned on, indicators
off.
11
11