Chapter 3: Operating Your Tv; Turning Your Tv On; Programming Your Tv's Channel Memory - Emerson ET 13P2, ET 19P2 Instruction Manual

Emerson radio instruction manual color television et 13p2, et 19p2

Hide thumbs

Table Of Contents

Table of Contents

C H A P T E R

Operating Your TV

Once you have connected your TV to an antenna or cable system, plugged the TV in,

and put batteries in the remote, you are ready to use the TV. The first thing you

should do is program your TV so it memorizes all of available channels.

Turning Your TV On

Programming Your TV's Channel Memory

Your TV's memory determines the channels that are available using the

buttons. If a channel is not in memory, you can tune to it with the number buttons, but

not with the

1 With the TV on, press the MENU button twice, then "Set-Up" menu will appear.

2 Use the

select 'Air' or 'Cable'. If you connected an antenna to your TV, select 'Air'; If you

connected a cable system, select 'Cable'.

3 Use the

button to enter the "Memorize Channels" process. Again press the CVOLB but-

ton to begin.

4 Press the MENU button to return to Set-Up menu.

5 Press the MENU button three times to return to normal TV viewing.

Your TV's channel memory will not be affected by a power outage. You will not need

to re-program the memory unless you change the type of cable or antenna connected

to your TV.

Set-Up

Language :

Reception :

Memorize Channels

Add/Delete Channels

Select

3-2

Memorize Channels

Memorizing all air channels.

Please stand by.

Press MENU to cancel and

returu to Set-up menu.