Canon VIXIA HF M30 Manual page 18

Writing to DVDs
07
Lesson
●
Writing to DVDs
After a list has been created, it is time to write the videos to a DVD. However, because DVD-R and
DVD-R DL discs can only be written to once, make sure that there are no mistakes in the list before
starting the process. It is also necessary to make sure that the CD/DVD drive in the computer is
compatible with the discs.
Select the List to Write
W hat is need ed to
write?
Three types of discs can
be used: DVD-R, DVD-RW
and DVD-R DL. Because
DVD-R and DVD-R DL discs
can only be written to once,
be sure to use unrecorded
discs. A lso, make sure
that the drive in the com-
puter can write to DVDs.
The menu screen can
be selected
ImageMixer 3 has six menu
screens that can be used.
They have different back-
grounds and designs, so
select the one that is most
suitable.
What is the "DL" in
"12cm DL"?
There are two types of DVDs:
Single layer (about 4.7 GB)
and dual layer (about 8.5
GB). "DL" refers to dual lay-
er DVDs. This is where you
specify one of these types.
When using a single layer
DVD-R or DVD-RW, then
select "12cm." When us-
ing a dual layer DVD-R DL,
then select "12cm DL."
18
Create a list as
described in
lesson 6.
❶ Right click the
list to write to
DVD.
❷ Click [Edit DVD
List].
❸ Select a menu.
❹ Select the size
of the disc.
❺ Click [OK].