Getting Started; Battery Installation; Battery Notice - VTech Write & Learn Lightboard User Manual

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit and open it.
3. Install 4 new "AA" batteries following the
diagram inside the battery box. (The use of
new, alkaline batteries is recommended for
maximum performance.)
4. Close the battery cover.

BATTERY NOTICE

• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the equipment when the
unit will not be used for an extended period of time.
• Do not dispose of batteries in fi re.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended
are to be used.
• Do not mix alkaline, standard(carbon-zinc) or rechargeable (nickel-
cadmium) batteries.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
NOTE:
the product, after the product is taken out of the package. If the
demo tag is still in position when you begin play, please remove
it to activate the normal play mode.
63400 manual.indd 3 63400 manual.indd 3
Please remove the demo tag, located on the bottom of
3
5/13/05 10:03:19 AM 5/13/05 10:03:19 AM