Preparation For Use; Unpacking And Setup - Emerson RP6248 Owner's Manual

UNPACKING AND SET UP
• Remove the radio from the carton and remove all packing material from the
radio. We suggest that you save the packing material, if possible, in the unlikely
event that your radio ever needs to be returned for service. The original carton
and packing material is the only safe way to pack your radio to protect it from
damage in transit.
• Remove any descriptive labels or stickers on the front or top of the cabinet. Do
not remove any labels or stickers from the back or bottom of the cabinet.
• Place your radio on a level surface such as a table, desk or shelf, convenient to
an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt,
dust, moisture, humidity, or vibration.
• Unwind the AC power cord and extend it to its full length.
AC OPERATION
The AC power cord is located inside the battery compartment. It is permanently
attached to the radio to prevent loss.
• Open the battery compartment by pressing on the "
and sliding it downward in the direction of the arrows.
RP6248-49_062705.p65

PREPARATION FOR USE

OPEN
4
4
OPEN
" marks on the cover
OPEN
27/6/2005, 11:55