Recalling Preset Stations; Changing Preset Stations - Emerson Research iC200 Owner's Manual

7.) Press the Band button to switch to the AM band and repeat the above procedure
to store up to 10 AM stations in the tuner memory.
NOTES:
• The FM memories are numbered "F 1" through "F 10". The AM memories
are numbered "A 1" through "A 10".
• After you press the Memory button the first time you must select a Preset
Memory number and press the Memory button again within 10 seconds,
while the memory number is flashing, or the station will not be memorized.

Recalling Preset Stations

Press the Band button to select the desired band.
Press the Preset

Changing Preset Stations

1.) Tune to the new station that you want to store.
2.) Press the Memory button and then press the Preset
the Memory Number that you wish to change.
3.) When the desired Preset Memory Number is flashing, press the Memory button
again. The new station is now stored and the previous station is deleted from
the memory.
iC200_NCab050307.p65
or buttons to scroll through the preset stations one by one.
23
23
or buttons to select
3/5/2007, 11:29