Setting The Wake-Up Time - Emerson RET66TQ Owner's Manual

SETTING THE WAKE-UP TIME

1.) Depress and hold the ALARM 1 button. The display will change from clock
time to wake-up time and flash "12:00".
Continue to hold the ALARM 1 button and repeatedly press the
button to adjust the display to the correct wake-up hour, AM or PM.
2.) Continue to depress the ALARM 1 button and repeatedly press the
button to adjust the display to the correct wake-up minute.
3.) When the display shows the desired Alarm 1 wake-up time release all the
buttons.
Repeat this procedure with the ALARM 2 button to set the desired wake up time
for Alarm 2.
To check the wake-up times just press the ALARM 1 or ALARM 2 buttons at any
time. The display will show the wake-up times as long as the ALARM set buttons
are depressed.
RET66_080504.p65
10
10
/HOUR
/MIN
5/8/2004, 16:05