Important Notes - Emerson Research SmartSet CKS3095S Owner's Manual

Time Projector Operation

IMPORTANT NOTES:

• The projected image of the time on your wall or ceiling is only visible
when the room lighting is ' Off' and the room is dark. The image will
not be visible when the room lights are ' On' .
• If you experience a power interruption when the time projector is ' On' ,
the main display and the time projector will go 'Off'. When power is
restored the main display will return to the correct time, but the time
projector will remain ' Off'. You must press the PROJECTOR 'On/Off'
button once more to switch the time projector ' On' again.
This is your indication that you experienced a power failure. If you
notice that the time display is no longer being projected on your wall
or ceiling this means that your power was interrupted, and although
the time on your SmartSet
need to reset all of the other electronic clocks in your home.
1.) Switch off the room lights to darken the room.
2.) Press the PROJECTOR ' On/Off' button to turn the projector ' On' .
3.) Turn the projector unit slowly to aim the projected image on the wall or ceiling.
CKS3095_041707.p65
®
clock will be correct you will probably
"PROJECTOR" On/Off Button
24
24 17/4/2007, 16:06