Pioneer DV-38A Service Manual page 95

1
STANDBY/ON button (KU/CA and LB Types)
Press to switch the player on or to put in standby.
POWER switch (WL, WL/RD and WY Types)
Press to switch the player on or off.
2
STANDBY indicator
Lights when the player is in standby, using a minimum amount
of power to maintain system settings.
3
Disc tray
When loading a disc, place discs in the disc tray with the label
side facing up.
4
DVD indicator
Lights when a DVD disc is loaded.
5
PROGRESSIVE SCAN indicator
Lights when unit is outputing 525 line progressive scan (non-
interlaced) video.
6
DVD-AUDIO indicator
Lights when a DVD-Audio playback.
7
DIGITAL DATA OFF indicator
Lights when unit is set to Digital Out Off .
DV-38A, DV-S88A, DV-S838A, DV-939A
8
FL OFF indicator
Lights when the fluorescent (FL) display is switched off.
9
Display window
Displays system information.
0
Remote sensor
Point the remote control toward the remote sensor to operate
the player.
-
7/0 (stop/open/close) button
Press to open and close the disc tray.
Press to stop playback. Pressing once enables playback to
resume from a point shortly before the location where it
stopped. During playback, press twice to open the disc tray.
=
4 1 (reverse) button
Press to go back to previous title/chapters/tracks. Press and
hold to perform reverse playback scanning.
~
¡ ¢ (forward) button
Press to advance to title/chapters/tracks. Press and hold to
perform fast-forward scanning.
!
8 (pause) button
Press during playback to pause. Press again to resume
playback.
@
3 (play) button
Press to start or resume playback.
95