Eye-Fi Upload - Nikon COOLPIX S3200 Reference Manual

The Setup Menu

Eye-Fi Upload

Press the d button M z tab M Eye-Fi upload
Option
b Enable
c Disable
(default setting)
B
Notes About Eye-Fi Cards
• Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.
• Select Disable where wireless devices are prohibited.
• Refer to the instruction manual of your Eye-Fi card for more information. In the event of
malfunction, contact the card manufacturer.
• The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi
functions.
• The camera is not compatible with the endless memory function. When it is set on a computer,
disable the function. If the endless memory function is enabled, the number of pictures taken may
not be displayed correctly.
• Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless
devices.
• Leaving the setting as Enable will result in the battery being depleted in a shorter period of time.
C
Eye-Fi communication indicator
The communication status of the Eye-Fi card in the camera can be confirmed on the monitor (A6).
• w: Eye-Fi upload is set to Disable.
• x (lights): Eye-Fi upload enabled; waiting to begin upload.
• x (flashes): Eye-Fi upload enabled; uploading data.
• y: Eye-Fi upload enabled but no images available for upload.
• z: An error occurred. The camera cannot control the Eye-Fi card.
C
Supported Eye-Fi Cards
As of November 2011, the following Eye-Fi cards can be used. Be sure that the Eye-Fi card firmware
has been updated to the latest version.
• Eye-Fi Connect X2 SDHC 4GB
• Eye-Fi Mobile X2 SDHC 8GB
• Eye-Fi Pro X2 SDHC 8GB
E66
Upload images created by the camera to a preselected
destination.
Images will not be uploaded.
Description