Electronic Vr - Nikon COOLPIX S3200 Reference Manual

The Setup Menu

Electronic VR

Press the d button M z tab M Electronic VR
Choose whether or not to use electronic VR (vibration reduction), which reduces
the effects of camera shake during shooting.
Option
w Auto
k Off (default setting) Electronic vibration reduction is disabled.
B
Notes About Electronic Vibration Reduction
• The effectiveness of electronic vibration reduction decreases as camera shake increases.
• The image captured using electronic vibration reduction may be somewhat "grainy" in
appearance.
• Electronic vibration reduction does not function under the following conditions or in the
following shooting modes:
- When slow sync with red-eye reduction (A41) is used.
- When exposure exceeds a certain length of time.
- When ISO sensitivity (E28) is set to any setting other than Auto.
- When Blink proof (E35) in smart portrait mode is set to On.
- In the following scene modes: Sports (A41), Night portrait (A41), Dusk/dawn (A42),
Night landscape (A42), Museum (A44), Fireworks show (A44), Backlighting (A44).
• The angle of view (the area captured in the recorded movie) during movie recording is smaller
when electronic vibration reduction is enabled.
C
Electronic Vibration Reduction
When Electronic VR in the setup menu is set to Auto and flash mode (A53) is set to W (Off) or
Y (Slow sync), the w icon may be displayed in the monitor. When shooting conditions are likely
to be affected by camera shake while w is displayed, the camera reduces the effects of camera
shake on images before recording them.
E56
When taking still images, electronic vibration reduction is
enabled when R (A6) is displayed in the monitor and all of
the conditions below are met.
• Flash mode is set to Off or Slow sync.
• A slow shutter speed is used.
• Continuous is set to Single.
• The subject is dark.
When recording movies, electronic vibration reduction is
enabled at all times.
Description