Table of Contents
Advertisement
11
Set Up (LPG Canister)
■ Unfold canister support legs to detent stops (Fig. 25, 26, and 27)
FIG. 25
■ Make sure that the FUEL VALVE on the canister support is fully closed
(turned fully clockwise)
■ Screw LPG canister onto canister support until fully seated (Fig. 29).
■ Insert threaded fitting on end of stove fuel hose into the female threaded
coupler on the canister support (Fig. 30). Hand tighten the connection.
FIG. 28
■ Ensure that canister support is as far away (about 8") from stove burner as the
hose length will permit (Fig. 31).
FIG. 26
(Fig. 28).
FIG. 29
FIG. 31
English-10
FIG. 27
FIG. 30
Advertisement
Table of Contents
