Advertisement
Page 4 of 4
Track Mounting, Power Feed Systems and Mounting Patterns
Variable Angle Connector
The Variable Angle Connector is pre-wired and
polarized. It contains a die-cast zinc nut which
accepts a standard 3/8" threaded conduit fitting.
Flexes to any angle between 0-90.
6053WH Matte White
6053BK Matte Black
6053NAL Aluminum
7-1/4"
0-270
Ceiling to Wall
Floating Invisible Feed
Can be mounted anywhere along the track at
a maximum distance of 4' from edge of track
extrusion. Accepts conduit or cable with 3/8" or
1/2" electrical connector (by others) . Can be
used with Live End, "L", "T", "X", and In-Line
and Variable Angle connectors. Use Track
Mounting Clips to mount the track.
26082 Zinc Plated
Wire Cover
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2012 Philips Group • F0512
Live End
Energizes Track from the beginning of a run.
KO permits direct feed with electrical
connector. It is included with Individual Track
Units. Use with plain track units.
6048NWH
Matte White
6048NBK
Matte Black
6048NAL
Aluminum
2-3/4"
Live End
Knock Out
Screw
Bottom Cover
Wall
Inside
Mini-Coupler
Corner
Used to connect two pieces of track together
mechanically and electrically. Power cannot
be fed to the Mini-Coupler. It is included with
Joiner Track Units.
Wall
Outside
6049NWH
Matte White
Corner
6049NBK
Matte Black
6049NAL
Aluminum
Track Unit
Mini-Coupler
Coupler
Screws
Cord and Plug
Energizes track from a polarized 120V
receptacle. Especially useful with plain track.
Supplied with a 15' two conductor 18 ga.
cord and In-Line switch. The switch is supplied
unattached. The track is not to exceed 1200
watts. The switch is rated for 6 amps, 720 watt
with cord and plug attached.
6062WH Matte White
6062BK Matte Black
3/8"
Electrical
Fitting
(by others)
Clamp Set
Track
Basic Lytespan
®
"L" Connector
The "L" connector is polarized and pre-wired.
It may be rotated for right angle or left angle
turn. KO permits direct feed with electrical
connector.
6050NWH Matte White
6050NBK
6050NAL
"T" Connector
The "T" connector is not pre-wired or
Track Unit
polarized. Used to make "T" pattern with
track. 12 ga. copper jumper wires supplied to
make all necessary connections. KO permits
direct feed with electrical connector.
6051NWH Matte White
6051NBK
6051NAL
Track Unit
4-1/8"
"X" Connector
The "X" connector is not pre-wired or
polarized. Used to make "X" pattern with
track. 12 ga. copper jumper wires supplied to
make all necessary connections. KO permits
direct feed with electrical connector.
6052NWH Matte White
6052NBK
6052NAL
4-1/8"
Job Information
1 Circuit Track
Matte Black
Aluminum
2-5/8"
Matte Black
Aluminum
Matte Black
Aluminum
Type:
6000
Advertisement
