Settings; Intellishield Highway/City Modes - Cobra 15 BAND XRS 9770 Operating Instructions Manual

Ultra performance digital radar/laser detector with xtreme range superheterodyne technology
Table of Contents

Advertisement

Settings

Your Detector
Settings

IntelliShield Highway/City Modes

Your detector is equipped with IntelliShield false signal rejection technology which
consists of a Highway mode and three different levels of City modes: City X, City
X Beep Off and City X+K. City X mode sounds a single beep when the signal is
first detected. City X Beep Off mode prevents all X band audio alerts until the
signal strength reaches Level 3. City X+K mode combines the City X mode with
prevention of K band audio alerts until the signal strength reads Level 2. This will
reduce false alerts while you are driving in or near urban areas where there are
many sources for conflicting X or K band signals such as microwave towers and
automatic door openers. The factory setting is Highway. The factory City mode
default setting is City X.
To Change From Highway Mode to City Mode
Press and release
Tone
the Set/City
One beep
button.
City Mode
NOTE
When you change to City mode, the unit will enter
N W
c
whichever city default mode is set at the time.
To Change From City Mode Back to Highway Mode
Press and release
Tone
the Set/City
Two beeps
button again.
Highway Mode
N W
h
10 English
Set/City Button
Press and release
Visual Display
Voice
c appears in
City X or City X Beep Off
the display
or City X, K
Visual Display
Voice
h appears in
Highway
the display
Your Detector
Setting City Default
You can set the default level for City mode (City X, City X Beep Off and
City X+K) either in Program mode or directly using the Set/City button.
To Set the City Mode Default Directly Using the Set/City Button
Press and hold the Set/
City button.
Release the Set/City
button to select the
current display as default.
To Set the City Mode Default Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to City.
Settings
Set/City Button
Press and hold
Tone or Voice
Visual Display
One beep each time the
Cycles – see chart above
display cycles
City X Beep Off,
None
City X+K or City X
Tone
Visual Display
City X Beep Off
One beep
One beep
City X+K
Two beeps
City X
City X Beep Off
City X+K
City X
City X+K
Beep Off
Nothing Comes Close to a Cobra
City X
Press and
hold the
City
Set/City
X+K
button
City X
Beep Off
Voice
City X Beep Off
City X, K
City X
City X
City X
11
®

Advertisement

Table of Contents
loading

Table of Contents