Pop Alert; K, Ku And X Band Detection; Vg-2 Alert - Cobra 15 BAND XRS 9770 Operating Instructions Manual

Settings
Your Detector

Pop Alert

The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature
of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses
a single, short-time pulse to measure the target vehicle's speed.
The Pop mode receiver senses Pop singles beyond the effective range of Pop
radar guns. As the Pop mode receiver is so sensitive, you should limit the use of
Pop Detect mode to highway and rural driving.
Pop Alert will alert you to Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect Off.
To Turn Pop Detect Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
ToneVisual
go to Pop Detect.
Two beeps
One beep

K, Ku and X Band Detection

The new Ku Band may be introduced to North America in the future. To prevent false
alerts until it is, the factory default for Ku Band detection is Off. In parts of North
America, annoying false alerts from door openers and similar devices are triggered on
the X Band and K Band. If desired, X Band or K Band can be turned Off. The factory
default for X Band and K Band detection is On.
To Turn X, K and/or Ku Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode, Tone
go to X, K or Ku band.
Two beeps
X-Band On
One beep
Two beeps
X - Band On
One beep
X-Band Off
Two beeps
X -B and Off
One beep
K-Band On
K-Band Off
K -Ban d On
K- B a nd O ff
20 English
Pop Detect On
P op O n
Display Voice
Pop On Pop On
Pop Detect Off
P op O ff
Pop Off Pop Off
Visual Display
X-Band On
X-Band Off
K-Band On
K-Band Off
Ku-Band On
Ku-Band Off
Ku-Band On Ku-Band Off
Ku -B a n d O n K u -Ba nd Off
Settings
Your Detector

VG-2 Alert

The detector is undetectable by VG-2 detection devices and will alert you when
such a device is in use near your vehicle. During the alert, the unit continues to
detect other signals. You can choose whether or not you want your unit to show
VG-2 Alerts. With VG-2 Detect mode On, you can also choose whether or not you
want your unit to sound audible VG-2 Alerts.
The factory settings are VG-2 Detect Off and VG-2 Detect Audio Off.
To Turn VG-2 Detect Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode, Tone
go to VG-2 Detect.
Two beeps
One beep
VG-2 Detect On
VG2 On
To Turn VG-2 Audio Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode, Tone
go to VG-2 Audio.
Two beeps
One beep
VG-2 Audio On
...Audio On
Visual Display Voice
VG2 On VG2 On
VG2 Off VG2 Off
VG-2 Detect Off
VG2 Off
Visual Display Voice
VG2 Audio On VG2 Audio On
VG2 Audio Off VG2 Audio Off
VG-2 Audio Off
...Audio Off
Nothing Comes Close to a Cobra 21
®