Ogm Settings; Answering Machine Messages - Clarity E814CC User Manual

3. Press <oK/menU> and <UP/down> to select between ON and OFF.
4. Press <oK/menU> to confirm.

oGm settinGs

record your outgoing message (announcement)
When you record your own announcement, it will be used when the answering machine
answers the call. If your personalized announcement is deleted, the pre-set announce-
ment will be restored automatically.
record/play/delete personalized announcement
1. Press <oK/menU> and <UP/down> to select Answering sys.
2. Press <oK/menU> and <UP/down> to select Announcement. Display
shows Play (2) Del (3) Rec (7)
3. To record your announcement, press 7; wait for the beep and start speaking; press 5
when finished.
4. To play the current announcement, press 2; you will hear your announcement (if
recorded) or the pre-loaded default announcement.
5. To delete (restore default announcement), press 3; you will hear a confirmation beep,
the display shows "Annc deleted".

answerinG machine messaGes

play messages on the answering machine
If you have new messages, the display will show e.g. 01/02 MSGS, which means you have
1 new message out of total 2 messages. New messages are played first, and then are
saved as old messages, until they are deleted. Old messages are played again after all new
messages are played completely.
using the direct key
In idle
1. Press <PLay/stoP> to listen to messages and memos.
2. Press <PLay/stoP> if you want to stop the playback.
3. Press <rePeat / rd/P> once if you want to repeat the current message from
28
using your CorDeD Base