Table of Contents
Advertisement
Preheating cups and pipes
Espresso coffee should always be prepared with the pipes already heated and served in a hot cup that enhances the
aroma and prolongs the flavour. Thermal shock can alter the aroma of coffee.
The lower the quantity of espresso coffee in the cup, the more important it is to heat the cup.
• Place the cup under the boiling water distributor.
• Half-fill the cup.
• Leave the water in the cup for 30 seconds and then empty it. This will preheat the pipes as well.
Preparing coffee
•
Position the cup or cups underneath the spouts.
• Check that the
• Press the button
button again.
Hot water
• Use the
key to switch the boiler on and prepare hot water.
• Wait for the symbol to stop flashing and remain illuminated.
• Place the cup or container under the distributor.
• Turn knob "A" (Fig. 7) to the left to obtain hot water.
Steam
• Switch on the heating system to obtain steam by pressing the
button
• Wait for the symbol to stop flashing and remain illuminated.
• Before placing the cup or container under the distributor, turn
the knob "A" (fig.7) to the left in order to let the remaining water
in the pipes coming out.
• Turn knob "A" (Fig. 7) to the left to obtain steam.
AMC15
PREPARA
PREP
PREP
ARATION OF
ARA
ARA
PREP
PREP
ARA
has stopped flashing. (= boiler temperature reached).
to start the supply. The supply stops automatically but it can be stopped early by pressing the same
TION OF
TION OF THE DRINKS
TION OF
THE DRINKS
THE DRINKS
THE DRINKS
TION OF
THE DRINKS
12
12
12
12
12
A
Fig. 7
Fig. 7
Fig. 7
Fig. 7
Fig. 7
Advertisement
Table of Contents
