Table of Contents
Advertisement
TUNING
Tuning of broadcast channels not already preset in the VCR
can be performed in two ways.
AUTOMATIC TUNING
• By "AUTOMATICALLY" tuning channels and placing them
in sequential order in the VCR's memory i.e. the first chan-
nel found will be memorised into the VCR's channel posi-
tion 1, the second channel found will be memorised into
the VCR's channel position 2 and so on.
• Execution of the "Automatic" tuning cancels all the preset
channels. DO NOT use this feature if you intend to use
some of the pre-tuned channels. Use the "Manual" tuning
function to tune in the additional channels you require.
MANUAL TUNING
• Each channel is tuned manually and individually. Follow
the steps laid out in the "MANUAL TUNING" section.
Before you tune...
• It is necessary to set the video channel if your VCR is
connected to the TV via the coaxial cable, and TV channel
35 is employed for broadcasting, or interference lines
appear on the picture. Please refer to "Video Channel
Setting".
Automatic Tuning
You can programme the tuner to scan all the channels you
can receive in your area. If you are using a Satellite receiver
turn it on and select SKY NEWS or a programme only avail-
able on Satellite before starting.
• Use the remote control for this procedure.
1
Turn on the TV and select the TV channel to the video
channel on the TV.
2
Press the MENU button.
3
Press the PLAY/o or STOP/ L button to select "INITIAL",
then press the F.FWD/B button.
4
Press the PLAY/o or STOP/ L button to select "CH TUN-
ING", then press the F.FWD/B button.
5
Press the PLAY/o or STOP/ L button to select "AUTO",
then press the F.FWD/B button.
• The tuner scans and memorises all the active channels in
your area. After scanning, the tuner stops on the lowest
memorised channel.
• Sorting of TV channels from P01 to P06 will be performed
automatically as follows.
P01: BBC1
P02: BBC2
P04: CH4
P05: CH5
* If you are using a satellite receiver, turn it on and select
Sky News before commencing tuning.
MENU
TIMER
SET UP
INITIAL
scanning
P03: ITV
*(P06: SKY NEWS)
INITIAL
CH TUNING
CLOCK
RF OUT
CH TUNING
AUTO
MANUAL
MOVE
8
To Select a Desired Channel
You can select a desired channel by using the PROGRAM
(o/p) buttons, or directly pressing the NUMBER buttons on
the remote control.
• Enter a channel numbers as a two-digit number for the
quickest results. For example, to select channel 6, press 0
and 6. If you only press 6, channel 6 will be selected after
a brief delay.
• You can only select channels 1–99.
Manual Tuning
• Use the remote control for this procedure.
1
Press the MENU button.
2
Press the PLAY/o or STOP/ L button to select "INITIAL",
then press the F.FWD/B button.
3
Press the PLAY/o or STOP/ L button to select "CH TUN-
ING", then press the F.FWD/B button.
4
Press the PLAY/o or STOP/ L button to select "MANUAL",
then press the F.FWD/B button.
5
Press the PLAY/o or STOP/ L button to select "POSI-
TION", then press the F.FWD/B button.
• When a weak signal is received in Manual Tuning mode, you
can change the background to solid blue or the static screen
by pressing the COUNTER RESET button.
6
Press the NUMBER, PLAY/o, or STOP/ L button to select your
desired position number, then press the F.FWD/B button.
• You can select position number 01-99.
• If [ON] appears on the right side of "SKIP", press the
PLAY/o or STOP/ L button to point to "SKIP". Then, press
the F.FWD/B button to select [OFF].
• If you want to remove scrambled signals, press the PLAY/o
or STOP/ L button repeatedly to point to "DECODER". Then,
press the F.FWD/B button to select [ON].
7
Press the PLAY/o or STOP/ L button to select "CHAN-
NEL", then press the F.FWD/B button.
Press the PLAY/o or STOP/ L button. The VCR tuner will
begin to search up or down automatically. When a chan-
nel is found, the VCR will stop searching and the picture
will appear on the TV Screen.
• You can select desired channel number by using
the NUMBER buttons. You must refer to the channel plan
and press three digits to select the channel number. (To
select channel 24, first press "0" button and then press "2"
and "4").
• If this is the channel you want, press the F.FWD/B button.
Channel Plan
CH Indication
01 – 10
21 – 69
74 – 78
80 – 99, 100
121 – 141
8
Press the MENU button to exit.
NOTE: To confirm that a channel has been
added, press the PROGRAM (o/p) buttons.
TV Channel
IRA-IRJ, gap
E21 – E69
X, Y, Z, Z+1, Z+2
S1 – S20, gap
S21 – S41
EN
Advertisement
Table of Contents
