Hitachi L22H01 CB Instruction Manual page 36

Quick
Start
Guide
L19H01 UB/UW/CB/CW
GB
L22H01 UB/UW/CB/CW
PLEASE NOTE:
By using a SCART lead (not supplied) you can improve the quality
of playback and sound. Remember you must still have the aerial
lead (not supplied) connected. If you are using a SCART lead you
should not have to tune your TV to your video, instead select the
SCART channel by pressing the TV/Input button on the remote
control.
1
a.Insert batteries into
Remote Control
b.Install TV Stand
a:
Use 2 x AAA size batteries.
b:
1. Open the box, and make sure all necessary parts are in the box.
2. Peel off/ remove the plastic film before installing the TV stand.
3. Cover an even stable surface with a soft cloth. Place the LCD TV unit
face-down on the cloth. Fit the stand onto the bottom of the LCD TV
unit as shown:
4. Then push until stand into the LCD TV's stand socket.
x 3 pieces
5. Attach the base to the TV stand with the 3 screws
that are provided and ensure that they are tightened.
2
Connect aerial
2
Do not connect the TV to the mains supply until
you have completed all the connections.
If you just want
Connect one end of the aerial lead to the aerial
to connect your
socket on the wall and the other end of the lead
TV to an aerial
to the appropriate socket on the back of your TV.
connect it as shown Now go to stage 4.
opposite.
If you want to
connect your TV
to a VCR
go to stage 3a.
If you want to
connect your TV
to a VCR and
a Satellite/Cable
box then
3-pin mains plug is for UK model;
go to stage 3b.
2-pin mains plug is for EU model.
3a
Connecting to a VCR
A
If you have a SCART lead, connect one
end of the lead to the SCART socket on
your VCR and connect the other end to
the SCART socket marked SCART on the
back of your TV.
B
Connect one end of the RF
lead to the aerial socket on
your TV and the other end to
the socket marked RF OUT
on the back of your VCR.
C
Connect your aerial lead
to the socket marked RF
IN on the back of your
VCR.
Now go to stage 4.
4
Switch on
A
Plug your TV and any other equipment that you have connected into the mains.
B
Press the AC SWITCHon the back of your TV to switch on your TV's power.
C
I
Then press the button on the front side view of your TV to switch on your TV. The screen will be blue
screen.
Note:
It is recommended to complete the VCR channel set up before the TV tuning process.
Connect your VCR to the TV and the antenna, then switch it on. Insert a pre-recorded tape and press
PLAY. This can help you to easily find the VCR channel as it will play the pre-recorded tape.
Before you start up the TV tuning process, the Satellite/Cable channel set up are recommended to
complete prior to the TV tuning process.
Connect your Satellite/Cable box to the TV and the antenna, and then switch it on. Select a channel
that you will easily recognise. This can help you to easily find the satellite/cable channel since the TV will
play that selected channel.
3b
OR
Do not connect the TV to the mains supply until you have completed all the connections.
Note: 2-pin adapter for EU market; 3-pin adapter for UK market.
A
B
C
5
A
B
C
D
E
Connecting to a VCR and
a Satellite/Cable box
A
Connect one end of an RF lead to the aerial
socket marked
to the socket marked RF OUT on the back of
your VCR.
B
Connect one end of another RF lead to the
aerial socket marked RF IN on your VCR and
the other end to the socket marked RF OUT on
the back of your Satellite/Cable box.
C
Connect your aerial lead to the socket marked
D
RF IN on the back of your Satellite/Cable box.
A
VCR
VCR
D
If you have SCART leads connect one end to
the socket marked SCART on the back of your
B
TV, and connect the other end to the SCART
Satellite/Cable
Satellite/Cable
socket on the back of your VCR.
Box Box
C
Now go to stage 4.
Select & Start Auto installation menu
Turn on the TV. Press the MENU button on the remote control to enter the menu option.
to select SETUP, then press OK to highlight Auto Installation. Press OK again
Press
for you to input the DEFAULT PIN Number "0000".
Press OK, and then press to select Country first, then press OK to confirm.
button to select the Start Search, and press OK to confirm. Press the
Press
select "YES". The unit will start Auto Search. Please be patient as this process will take
a few minutes.
When Auto Installation is completed, press EXIT to exit the screen.
on your TV and the other end
DVD
EJECT
MENU
TEXT
DVD
AUDIO SUBTITLE
ZOOM
REPEAT
ANGLE
button to
LHD01