Menu System; Picture Menu - Hitachi 37LD8550 Instructions For Use Manual

• Press the "P+" button to select the next
programme.
Programme Selecting (direct access):
Press digit buttons on the remote control
handset to select programmes between 0
and 9. The TV will switch to the selected
programme after a short delay.
• For a two digit programme number enter the
second digit after pressing the first digit
within 2 seconds.

Menu System

Your TV has been designed with a menu
system to provide easy manipulation of a
multifunction system.
Press the button to enter the menu.
 
Press / button to select a menu title and


then / button to select a menu item and
 
/ or "OK" button to enter the menu item.
• Press the button to exit the menu.
• Press the button to return to the previous
menu.

Picture menu

 
By pressing / button, select the first icon.
Picture menu appears on the screen.
Mode
Contrast
Brightness
Sharpness
Colour
Colour Temp
Noise Reduction
Film Mode
3D Comb
Reset
PAL 50Hz
Mode

By pressing /

 
Press / button to choose one of these
options: Natural, Dynamic and Cinema.
Picture mode can be changed directly by
pressing the button.
PICTURE
Cinema
62
24
10
32
Warm
Medium
Off
Off
button, select Mode.
Contrast

By pressing

Press button to increase contrast. Press
button to decrease contrast. Contrast level
can be adjusted between 0 and 63.
Brightness

By pressing
ness. Press

button to increase brightness.

Press button to decrease brightness.
Brightness level can be adjusted between 0
and 63.
Sharpness
By pressing

ness. Press 

ness. Press
ness. Sharpness level can be adjusted be-
tween 0 and 31.
Colour

By pressing

Press button to increase colour. Press
button to decrease colour. Colour level can
be adjusted between 0 and 99.
Hue
This item is displayed in picture menu when
the TV receives an NTSC signal. By press-

button, select hue. Press
ing /

to increase hue. Press
hue. Hue level can be adjusted between -31
and 31.
Colour Temp

By pressing
Temp. Press

these options: Cool, Normal and Warm.
Noise Reduction
This item is used to reduce the image noise
and improve the picture quality at weak sig-
nals.

By pressing
duction. Press
duction level to Off, Low, Medium or High.
- 10 -

button, select Contrast.
/

button, select Bright-
/

button, select Sharp-
/
button to increase sharp-
button to decrease sharp-

button, select Colour.
/

button to decrease

button, select Colour
/

/ button to choose one of

button, select Noise Re-
/
  button to set Noise re-
/



button