Table of Contents
Advertisement
APS is running...
UK - I
After APS is finalized, the programme table
will appear on the screen.
Source menu
By pressing
/
icon. Source menu appears on the screen.
SOURCE : TV
TV
EXT - 1
EXT - 2
EXT - 3
EXT - 4
EXT - 4S
EXT - 5
PC
In source menu, highlight a source by
pressing
/
button and switch to that
mode by pressing
PC Mode
Installation
• Power off both Computer and Display before
making any connections.
• Set your PC's resolution correctly before
connecting to the TV. See the table on page
25 for supported modes.
• Use a D-SUB cable to connect the TV's PC
input to the computer's RGB output termi-
nal.
15 Pin Mini D-Sub Connector
• Tighten the screws of the Display cable until
the connectors are fastened securely (fin-
ger-tighten only).
055,25 Mhz
Cancel
button, select the sixth
/
or "OK"button.
Menu System in PC mode
Press the
button. The menu will be dis-
played in the middle of the screen.
PC Picture Position Menu
By pressing
/
PC Picture Position menu appears on the
screen.
Autoposition
H Position
V Position
Dot Clock
Phase
Autoposition
If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
• Select Autoposition item by using
buttons.
• Press
or "OK" button.
Warning: Auto position adjustment recom-
mended to be done with the full screen im-
age for the proper adjustment.
H (Horizontal) Position
This item shifts the image horizontally to
right hand side or left hand side of the
screen.
• Select H Position item by using
ton.
• Use
/
button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards
the top or bottom of the screen.
• Select V Position item by using
ton.
• Use
/
button to adjust the value.
- 15 -
button, select the first icon.
PC PICTURE POSITION
1024x768
H:48kHz V:60Hz
50
50
50
50
/
/
but-
/
but-
Hide quick links:
Advertisement
Table of Contents
