Table of Contents
Advertisement
2 Release the wheel button. The drawing window moves the distance and
direction you specified.
To set the IntelliMouse zoom factor
1 On the View menu, click Options. The View Options dialog box appears.
2 Click the Current page tab, and enter a new zoom factor in the
IntelliMouse Percentage text box in the View Changes section.
3 Click OK.
Returning to a Previous View
You can return to any of the most recent views. This is useful when you have
not saved the view you need as a custom view, but it was recently displayed.
You don't have to wait until a view is completely drawn before issuing
another command to return to a previous view.
To return to a previous view
On the View menu, click Last, or click the Last View button on the All-In-
One toolbar.
To return to a subsequent view
On the View menu, click Next, or click the Next View button on the All-
In-One toolbar.
IMPORTANT
View tool. The Next View tool has an effect only when a view other than the
most recently created one is displayed in the drawing window.
Saving and Recalling Views
Custom views make it easy to return to parts of a drawing you display often.
You create a custom view by assigning a name either to the view in the active
pane or to one defined by a marquee. There is no limit to the number of
custom views you can save per drawing.
|
94
Chapter 8 Controlling Views
You must use the Last View tool before you can use the Next
Advertisement
Table of Contents
