Pioneer AVD-505 Service Manual page 31

1 BACK LIGHT switch
The brightness of the light built into
the display to illuminate the LCD
screen (the back light) can be set to
either of two levels: Bright or Dark.
Dark Bright
• The back light is dimmed
automatically when the vehicle's
lights are turned ON to make the
screen easy to see at night.
2 BRIGHT control
Controls the brightness of the image
colors on the LCD screen.
Dark
• The color of the LCD screen may
appear lighter or darker
depending on the angle of vision.
In this case, the brightness of the
image can be adjusted with the
BRIGHT control.
3 VOLUME control
Controls the volume of the display
speaker.
Softer
• Make sure the volume level of
your system is set to a level that
will permit you to hear outside
traffic or emergency vehicles.
4 Speaker
5 Signal receiver
This receiver receives signals
from the remote controller
supplied with the audio visual
Bright
master unit.
6 POWER indicator light
This light comes on when the
system power is ON.
AVD-505
Louder
31