Ferrari F430 Owner's Manual page 40

same button.
Four options are available:
- adjusting the instrument panel brightness
- switching the clock ON/OFF
- setting the hours
- setting the minutes.
Within each specific area, briefly press
the right-hand button to make the
SET
following adjustments:
- increase the instrument panel brightness
- switch the clock ON/OFF
- increase the hours
- increase the minutes.
MODE
SET
The programming mode is exited if no
button is pressed for more than 10 seconds
(timeout) or after the left-hand button
has been pressed briefly from the
MODE
minute-setting option.
In standard mode, briefly pressing the
right-hand button switches the
SET
odometer between trip and total kilometres,
40
whereas pressing the right-hand button for
a longer time resets the trip odometer (see
page 30).
Outside temperature display
Briefly press the left-hand button MODE
to display the outside temperature on the
multi-function display.
Instrument panel lighting
Press the left-hand button MODE for a
longer time to display the symbol on the
multi-function display.
Briefly press the right-hand button SET
to adjust the brightness of the instrument
panel to a value between 0 and 30.
Clock
If you do not wish to display the time, press
the left-hand button MODE for a longer
time, press it briefly again and select OFF.
In this case, the time is not displayed even
when the ignition key is subsequently
turned to position II.
If you wish to display the time again, the
procedure described must be repeated,
selecting the option ON.
When the battery is disconnected, the clock
stops. When the battery is reconnected, the
exact time must be reset using the multi-
function buttons as described earlier.
If one or more alarm symbols appear on the
multi-function display, the time will not be
displayed as long as the alarm is active.
As you can travel for long distances with
several warnings on, the following may