Mitsubishi Electric 3D DLP WD-73C11 Basic Owner's Manual page 29

Appendix C: Troubleshooting, continued
Reset Name When to Use
System Reset If the TV does not turn
on or off, does not
respond to the remote
control or control-
panel buttons, or has
audio but no video.
TV Reset To reset all consumer-
accessible settings
IMPORTANT:
and all memories to
Use this reset
the original factory
only if other
defaults.
troubleshooting
has been unsuc- Use TV Reset if the TV
cessful. can respond to con-
trols but TV behavior is
abnormal.
CAUTION: All owner-
performed setups and
adjustments will be
erased.
Service
If you are unable to correct a problem with your
TV, consult Mitsubishi Consumer Relations at
1 (800) 332-2119.
• DO NOT adjust any controls other than those
described in this Owner's Guide or the on-line
supplemental guide.
• DO NOT remove the protective back cover of your TV.
How to Use
Press and hold the POWER button on
the control panel for ten seconds.
1. While viewing the TV, press
MENU to display the TV main
menu.
2. With the main menu displayed,
press number keys 1 2 3 to
display the Reset menu.
3. READ THE ON-SCREEN
WARNING AND INSTRUC-
TIONS.
• If you do not wish to use this
reset, press EXIT or MENU to
back out.
• If you wish to continue,
press ENTER to erase all
memories and settings.
Service and Custo mer Support
Customer Support
•
•
Appendices
Resulting Action
The TV will turn off. The green
LED will flash quickly for about
one minute. The changes you
made most recently, before using
SYSTEM RESET, may be lost.
The TV will start the initialization
process and then turn off.
The front green LED will start
flashing. All memory and
settings outlined in this Owner's
Guide will need to be set again.
To order replacement or additional remote controls,
visit our website at www.mitsuparts.com or call
1 (800) 553-7278.
For questions:
- Call Consumer Relations at 1 (800) 332-2119.
- E-mail: TVSupport@mevsa.com
- Website: www.mitsubishi-tv.com
For assistance call 1(800) 332-2119
29