Table of Contents
Advertisement
I
NSTALLATION OF AN
11. Configure the auxiliary scanner to send formatted data to the MS7220.
Normal slave mode operation will only require reserve Code 32 to be
set in the auxiliary scanner. The following bar code applies for all
scanners, except the MS6720, to be used as an auxiliary scanner.
Contact a Metrologic representative for information on the MS6720.
Reserve Code 32
³
1
2
4
12. Configure the MS7220 to activate the auxiliary port. Enable the
auxiliary port and configure it to recognize slave formatted data with the
following bar code:
13. Turn on the host system.
Figure 6: Auxiliary Scanner Setup
12
A
UXILIARY
8
1
7
S
CANNER
Enable Aux Port
³
4
3
7
3
3
0
Advertisement
Table of Contents
