9.2.21. Removing the Inverter Board
Preparation : perform the section 9.2.1., 9.2.2.,1
9.2.4. and 9.2.13. to 9.2.18. to 9.2.20. first.
1. Remove the LCD Cable from the Inverter.
2. Peel off the Tape for fixation from Inverter Case.
3. Remove the Inverter with the Inverter Case.
9.2.22. Removing the WWAN Antenna
Board (MAIN), (SUB)
Preparation : perform the section 9.2.1., 9.2.2.,1
9.2.4. and 9.2.13. to 9.2.18. to 9.2.20. and 9.2.22.
first.
1. Open the SIMM cover and then remove the 2
screws (a).
Screw (a) : DXHM0057ZA (N7)
2. Remove the antenna cover.
3. Peel off the LCD hold sheet.
LCD Hold Sheet : DFHR3E92ZA (K1013)
4. Peel off the 2 cable fixed sheets and cable blind
sheet.
Cable Fixed Sheet : DFHR8526ZA (K1023)
Cable Blind Sheet : DFGX0475ZA (K1016)
5. Remove the each 2 screws (b) and then remove the
antenna board (MAIN), (SUB).
Screw (b) : DFHE5025XA (N1)
34