9.2.6. Removing the Disc Cover
Preparation : perform the section 9.2.1. to 9.2.3.
first.
1. Remove the 1 screw (N) of the disk angle.
Screw (N) : DXHM0057(N7)
2. Slide the disc cover to the disc cover shaft and
remove the cover.
3. The disk cover shaft is pulled out while sliding and
removed it from the disk angle in the direction of the
touch pad.
9.2.7. Removing the Touch Pad
Preparation : perform the section 9.2.1. to 9.2.3.
first
1. Peel off the tape.
2. The 5 hooks of the pad cover are depressed in the
direction of the center of the touch pad by using the
small screwdriver.
3. Remove the hooks of the toutch pad and the Pad
button, and remove the touch pad.
28