2. Remove the 2 screws (T).
Screw (T) : DXQT2+E6FNL (N13)
3. Remove the connector (CN23)
4. The antenna cover (L) is inclined in the direction of
arrow A and remove it.
Remove theantenna cover (L) from the topcase.
5. Remove the connectors (CN10), (CN11) of LCD
cable and (CN28) of WWAN cable.
6. Remove the DC-IN jack holder.
7. Returns the main board on the reverse.
Peel the tape (A) of the drive FFC and remove the
FFC.
8. Remove the connector (CN3) and the connector
(CN16) of LAN cable.
Peel off the tape (B) of HDD FFC and remove the
FFC.
9. Remove the main board.
30