Magnavox MDR513H/F7 Owner's Manual page 106

Playback (cont'd)
5
Subtitle Language (Default : OFF)
Set the subtitle language.
Use [ / ] to select a setting, then press [OK].
Subtitle Language
OFF
English
French
Spanish
Other
Your setting will be activated.
If "Other" is selected for
using [the Number buttons].
Code Input
-
• When you finish entering the code, press [OK]. Refer
to the language code table on page 119.
Note
• Only the languages supported by the disc can be
selected.
• Audio language setting may not be available to
some discs.
• You can change or switch off the subtitles on a DVD
also from the disc menu if it is available.
• Press [CLEAR] or [ ] to erase numbers entered
incorrectly.
6
Angle Icon (Default : ON)
Set to "ON" to show the angle icon during the playback.
Use [ / ] to select a setting, then press [OK].
Angle Icon
ON
OFF
Your setting will be activated.
106 EN 106 EN
SETUPS
(DVD only)
3 5
to , press 4-digit code
- - -
(DVD only)
7
Still Mode (Default : Auto)
Select "Auto" usually.
Use [ / ] to select a setting, then press [OK].
Still Mode
Auto
Field
Frame
Your setting will be activated.
Auto : Optimum resolution setting ("Field" or
"Frame") will be selected.
Field : Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.
Note
• Frame is 1 completed video image made up of 2
fields (There are 30 frames per second of NTSC video).
8
Variable Skip / Replay
Assign [V.SKIP] or [V.REPLAY] to skip or rewind by a
certain amount of time when they are pressed.
Use [ / ] to select a desired item, then press [OK].
A
Variable Skip
B Variable Replay
Refer to the explanations below and set the selected item.
A
Variable Skip (Default: 30 seconds)
Sets the amount of skip time for [V.SKIP].
Variable Skip
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
B
Variable Replay (Default: 30 seconds)
Sets the amount of rewind time for [V.REPLAY].
Variable Replay
5 seconds
15 seconds
30 seconds
1 minute
5 minutes
(DVD only)