How to Operate
Control panel handset
Battery check
Whenever the operation buttons are pressed, the LED lamp will flash.
While the LED is flashing the infrared remote control is available.
When illumination from the LED lamp becomes weak and you can not
easily operate the control panel, the batteries should be replaced.
2
Infrared remote control transmitter
Operation panel handset (tactile keys)
High switch
Medium switch
Low switch
Off switch :
to stop the operation.
Caution :
Be careful not to drop or get the operation panel wet.
Operation panel on body
During operation, the red LED
is illuminated.
Infrared remote control receiver.
Power On/Off switch
If the batteries in the control panel
handset are weak or exhausted,
the cleaner can still be operated
using the on/off switch on the body.
Whenever you push the button,
the mode changes as follows: High -> Off ->High ... .
How to operate the rug & floor nozzle
Cleaning in the room
When you twist the
operation handle, the
direction of rug & floor
nozzle can change
easily.
Use the rug & floor nozzle not to float from the floor.
9
Cleaning corners and narrow places
How to Empty the Dust Case
1) Empty the dust case before the dust reaches the
max line. If you continue using the cleaner with a full
dust case, the suction power will be decreased.
2) Empty the dust case periodically.
3) When emptying the dust case also remove the dust
around the filters.
Note :
¡
Before you empty the dust case, be sure to turn off the power and
unplug the cleaner from the mains socket.
How to dispose of the dust
1
Open the dust case cover while pressing
the button of dust case, and lift out the
dust case from cleaner body.
Notes :
¡When you lift out the dust case from cleaner
body, be careful not to press the open button
of the dust case.
¡Do not lift out the dust case from the body
while the cleaner is in use.
¡The dust case should be kept upright when
removing it from the body to prevent dust
spillage.
2
Put the dust case into a big vinyl bag, and press the open button in the bag.
¡Turn the dust case downward and push the open button on the lid of the dust case to release
dust into a vinyl bag.
¡To remove stubborn dust adhesion inside the dust case, pat the side of dust case.
¡Dust around the mesh filter and under the mesh filter can be removed with tissue paper and
an old toothbrush.
Dust case
Open button
for lid of dust
collection case
Dust
The lid of dust case
Notes :
¡Some types of dust may cause the suction power to become weak before max line is reached, in that
case, empty the dust and clean the filters.
¡If the rug & floor nozzle sucks some sharp items such as pieces of broken glass, pins, take care not to
touch them.
Dust
case
Max line
Open button
for lid of dust
collection case
Transparent
case cover
Dust
Button for the
case
dust case
Under mesh
Tissue
filter
paper
mesh
filter
The lid of
dust case
7
Need help?
Do you have a question about the CVSF8BS and is the answer not in the manual?
Questions and answers