Table of Contents
Advertisement
Item
MONITOR OUT
While the image signal from the input port chosen in step (1) is
projected, the image signal from the input port selected in step (2)
is output to MONITOR OUT port.
(1) Choose a picture input port using
▲/▼ buttons.
Choose STANDBY to select the
picture output in the standby mode.
(2) Select the output signal from the
MONITOR OUT port using ◄/► buttons.
Select OFF to disable the MONITOR OUT port for the input port
or standby mode chosen in the step (1).
• If you have changed the setting of STANDBY, it applies only to
the current standby mode, NORMAL or SAVING, selected under
STANDBY MODE, without changing the setting of the other mode.
The factory settings are as follows:
- COMPUTER IN for the NORMAL mode of STANDBY MODE
- OFF for the SAVING mode of STANDBY MODE
Description
SETUP menu
35
Advertisement
Chapters
Table of Contents
