Hitachi ED-X26 User Manual page 24

Selecting an input signal (continued)
Press COMPUTER button on the remote control to select
1.
the COMPUTER IN port.
Press VIDEO button on the remote control.
1.
Each time you press the button, the projector switches its
input port from the current port as below.
S-VIDEO ↔ VIDEO
● While ON is selected for AUTO SEARCH item in OPTION
menu, the projector will keep checking every port sequentially
till an input signal is detected (
pressed when COMPUTER IN port is selected, the projector
will check S-VIDEO port first.
Press the MY SOURCE / DOC. CAMERA button on
1.
the remote control. The input signal will be changed
into the signal you set as MY SOURCE (
● This function also can use for document camera. Select the
input port that connected the document camera.
43). If VIDEO button is
45).
Operating
COMPUTER button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH
FREEZE PAGE
MAGNIFY
UP
ON
DOWN
OFF
KEYSTONE
MY BUTTON
1 2
POSITION
VIDEO button
MY SOURCE/
COMPUTER
VIDEO DOC.CAMERA
ASPECT AUTO SEARCH
FREEZE PAGE
MAGNIFY
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON
1 2
POSITION
MY SOURCE /
DOC. CAMERA button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
AUTO
ASPECT SEARCH
MAGNIFY FREEZE PAGE
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON
1 2
POSITION
BLANK
VOLUME
MUTE
MENU
BLANK
VOLUME
MUTE
MENU
BLANK
VOLUME
MUTE
MENU
15